4 Ways to Keep Your Transmission in Good Condition

28 May 2015
 Categories: , Blog


Many car owners eventually run into problems with their transmission, which is unfortunate since transmission repairs can be costly. In order to avoid extensive repairs, you will want to know of these four ways to keep your transmission in the best condition for as long as possible:

  1. Add a Friction Modifier: There are many additives that you can include in your transmission fluid that help to keep it running more smoothly for a longer period of time. However, the best kind to add is the kind that you can purchase from professionals. You shouldn't purchase these modifiers without professional advice since you could inadvertently choose one that is not the best type for your specific transmission. By purchasing the right kind of modifier, you can increase the life of your transmission and its reliability significantly. 
  2. Install an Auxiliary Cooler: The main complication for many car owners to run into with their transmission is overheating. When the transmission becomes overheated, it begins to cause seals to harder, the clutches to burn, and the transmission fluid even begins to break down. In order to reduce the amount of heat in the transmission, you should install an auxiliary cooler, which is especially important for vehicles that tow trailers, carry heavy loads, or travel in rougher terrain. 
  3. Add a Cooler Line Filter: All transmissions come with filters in order to filter out the transmission fluid while it is running. However, these filters are sometimes not enough to remove some of the most damaging particles since they are small and can slip right through. With a cooler line filter, you can eliminate these small contaminants. Purchasing this filter is really inexpensive and can end up saving you a great deal since it will expand the life of your transmission and prevent clogs that will need to be repaired.
  4. Help the Transmission Shift: Most of the transmission wear occurs during a shift. If you are mindful of the times when your transmission begins to shift, you can ensure that once you reach this speed, you ease up on the gas, which will force the shift and reduce the amount of load that is being put on the clutches. You can tell when your transmission shifts by paying close attention to the sound. When it revs up and then slows down, that is when a shift occurs.

By keeping in mind these four tips to maintain your transmission, you can be sure that you are preventing a number of repairs. Of course, once repairs do come up, you will want to visit the professionals who can provide you with low-cost estimates and high-quality repairs.